background image

 

 

Part 2 

GETTING STARTED 

CONGRATULATION 

You have made a very wise decision by purchasing the easy loading; 

low noise; high resolution; light weight; high reliability and high performance 
thermal  printer  Aura  (PP-8800/8800E,  PP-8800/8800E-S,  PP-8800/8800E-P, 
PP-8800/8800E-L  &  PP-8800/8800E-W)  series  of  Posiflex  products.  This 
series  of  printers  has  been  elegantly  designed  for  a  Point-Of-Sale,  kitchen  & 
kiosk application. The PP-8800/8800E series comply with UPOS 1.8 standards 
under Posiflex UPOS driver support. The manufacturer of this printer not only 
wishes  to  take  this  opportunity  to  congratulate  your  smart  investment  on 
buying  this  printer  but  also  likes  to  express  the  wishes  for  your  prosperous 
future by using it.

 

PRODUCT BRIEFING 

The Aura  PP-8800/8800E, PP-8800/8800E-S, PP-8800/8800E-P, PP-

8800/8800E-L & PP-8800/8800E-W series printer uses thermal sensitive paper 
in  form  of  a  roll  at  a  width  of  80  mm  (standard)  or  58  mm  (option).  These 
Aura  series  printers  serve  the  stand-alone  desktop  application  as  well  as  the 
application within a Posiflex integrated POS system equally perfect. 

PP-8800/8800E  series  support  5  types  of  interface  input  through 

different  sub-codes  to  the  model  number.  The  standard  model  of  PP-
8800/8800E  is  USB  interface,  PP-8800/8800E-S  is  Serial  interface,  PP-
8800/8800E-W  is  Wi-Fi  interface  and  for  PP-8800/8800E-P  is  parallel 
interface. The PP-8800/8800E-L connects to a LAN port of POS systems. The 
PP-8800/8800E able to connect the USB port of POS systems either true USB 
interface application or  through  simulates a  RS232 device  through driver and 
performs  thermal  printing  particularly  designed  for  POS  applications  with 
serial  interface.  The  PP-8800/8800E  series  is  already  POSReady  and  Win  7 
compliance. 

The Aura PP-8800/8800E series support a guillotine type auto cutter 

for  paper  partial  cut  and  a  manual  cut  mechanism.  The  Aura  series  also 
supports  user’s  company’s  LOGO  downloading  for  superior  performance.  It 
even  supports  some  enhancement  capability  for  reminder  function  to  persons 
around.  It  can  be  used  to  drive  a  separately  purchased 

kitchen  bell

  for  such 

reminder function in noisy environment. This printer also supports application 
in different countries of various kinds of power systems by changing the power 
cord  to  the  power  adaptor.  It  offers  outstandingly  high  printing  speed.  This 
series make beeping sound as response to Paper End or Paper Near End signals. 
20  plus  code  pages  are  supported  in  the  standard  model  for  application 
convenience. 

Summary of Contents for Aura PP-8800 Series

























Reviews: