Page 9
Paper Cutting
Generally, after paper printed and automatically cut every time, printer will
retract the paper roll in order to reduce the paper loss. When the auto-cut
function enable, the printer will leave the advance paper in 4.8 mm long.
Incase the user applies cut without paper feed through DIP switch and setting
change to have something such as a logo printed on top of each slip, the
advance paper will be in 4.8 mm. It is also highly suggested to print the logo
and necessary paper feeding to make 4.8 mm paper advance right after each
cut to prevent curling up and jamming of paper front edge inside the paper exit
slot.
INSTALLING DRIVER
There will be a Posiflex Product Information CD or DVD or a separate CD of
similar nature, which is specifically create for the Aura-6800U and Aura-
6800L. Please find the appropriate subfolder from the non-specific Posiflex
Product Information CD or DVD and please find the information document
such as “read me” or installation guide or application guide and follow the
instructions inside.
LAN and Wi-Fi PRINTER SPECIFIC ISSUES
Web Manager for Aura-6800L
The default static IP for the Aura-6800L is 192.168.192.168 and default listen
port is 9100. User may set his own IP to the same network segment and use
any browser to connect to the printer IP to configure the LAN setup of the
Aura-6800L including changing the printer IP for application according to his
network administrator’s request. However,
DHCP is not support
.
Reset Pin Hole
As the setup for the Aura-6800L/W can be set freely, the changes are not well
registered some troubles could be introduced. Therefore, in Aura-6800L/W,
there is a “Reset pin hole” near the LAN connector or Wi-Fi Module. Use
something like a ball pen tip or straightened end of paper clip to push and hold
for at least 5 seconds into this hole will reset the LAN / Wi-Fi setup of the
printer back to the default values at delivery so the user may re-do all setup.
The LAN setup can be viewed in second paragraph of self-test printout for the
Aura-6800L.