18
Sitter II
®
Fig. 13 - Chair/Wall Bracket (Front View)
RElEaSE
lEVER
SCREW
HOlES
Wall Mount
1. Choose a location out of the patient’s reach, but with indicator lights in clear view of staff.
2. Use wall/chair bracket (Cat. No. 8276 (without wire clip), (fig. 13).
3.
Screw attachment:
• Position wall bracket with back (flat side) against wall (fig. 13).
• Using bracket as a guide, mark spots to insert anchors into wall.
Make sure it is safe to drill and there are no pipes or electrical wires that
could be damaged.
• Drill holes where marked and insert anchors.
• Position bracket over holes. Insert and tighten screws.
4. Slide alarm onto bracket from top down until it locks in place.
5. To remove alarm, gently push release lever IN while sliding alarm up and out (fig. 14).
6. Make sure sensor and/or nurse call cables can be secured out of the way and do not present
a tripping hazard.
Fig. 14 - alarm/Bracket (Front View)
SlIDE
alaRM
uP
POWER
LOW BATTER
Y
HOLD
SELECT
Sitter II
▼
▲
Posey
RElEaSE lEVER
Summary of Contents for Posey SITTER II
Page 35: ...Notes ...
