Sitter II
®
17
Fig. 10 - Wire Bracket
Fig. 11
SlIDE DOWN TO lOCK
SlIDE alaRM OuT
Fig. 12
PRESS
RElEaSE
lEVER
Mounting the Sitter II
The Sitter II comes with two mounting brackets:
• one (1) for wall or chair mount. (Cat. No. 8276 (without wire clip)
• one (1) for bed mount. (Cat. No. 8276)
For additional brackets, call Posey Customer Service at 1.800.447.6739 or 1.626.443.3143.
Before each use, check that:
• alarm is securely mounted out of the patient’s reach and functions properly by activating
alarm (see pages 20-21).
• Indicator lights are in clear view of staff.
Bed Mount
NOTE:
The Sitter II comes with a standard bed bracket that fits head and footboards ½” – 2”
(1 cm - 5 cm) thick.
1. Use wire bracket (Cat. No. 8276) for head or footboard mounting (fig. 10).
2. Slide alarm onto bracket from top down until it locks in place (fig. 11). You will hear an audible
“click” when the alarm slides into place on the bracket.
3. Choose location on head or footboard where patient cannot reach or tamper with the alarm
or connections.
4. Pull bracket wire away from alarm to create an opening wide enough to fit the head or
footboard. Slide bracket onto bed and push down to ensure a snug fit. Make sure indicator
lights are in clear view of staff.
5. To remove alarm, gently push release lever IN while sliding alarm up and out (fig. 12).
6. Make sure sensor and/or nurse call cables can be secured out of the way and do not present
a tripping hazard.
Summary of Contents for Posey SITTER II
Page 35: ...Notes ...
