Sitter On Cue PRO
11
ADJUSTING VOLUME
Adjusting Alarm Volume
There are three (3) alarm volume settings: low, medium and high (default setting). These allow you
to select the right volume for facility and/or patient needs.
All volume settings are within OSHA standards. For maximum staff alert in noisy areas, use HIGH
(loudest) volume setting.
Fig. 7
NOTE: ALWAYS check to ensure staff can hear alarm at the farthest possible
distance before leaving patient unattended.
To Change Volume:
1.
Lift the programming control protective cover (Fig. 4).
2.
Ensure fall monitor is on.
3.
Press VOLUME button on left side of fall monitor to scroll through the volume selections (Fig. 7).
4.
Each time you press the button, the volume changes and a sample plays.
5.
Continue to press the VOLUME button until you hear the desired volume. The last sample heard
is the volume in use.
6.
Replace the programming control protective cover, securing it into place.
