POS-X Xi1000, Programming Manual

Page: 4 / 52

3
Barcode Scanner Setup Procedures
1) Locate a group that contains the parameters to be
changed.
2) Scan the "Enter Group #" label. The scanner will
sound beeps indicate that setup is in progress
3) Scan the label representing the parameter to be
changed
4) Scan the "Exit" to end the group currently selected,
the scanner will sound beeps
5) Repeat the procedure for other groups including the
parameters to be changed
Set the operating mode to "Continuous mode"
1) Scan "Enter Group 5"
2) Scan "Continuous/Trigger off"
3) Scan "Exit"
Assign Preamble string as "#", and postamble string as
"END"
1) Scan "Enter Group 6"
2) Scan Preamble
3) Scan "#" from "Full ASCII Table and Table-Hex."
4) Scan "Confirm" Label in Table-Hex
5) Scan "Postamble"
6) Scan "E", "N", "D" from "Full ASCII Table and
Table Hex" consecutively
7) Scan "Confirm" Label in Table-Hex.
8) Scan Exit
Example 1:
Example 2