POS-X Xi1000, Programming Manual

Page: 3 / 52

2
Getting Started
To install a keyboard wedge
barcode
scanner, follow the steps
listed below:
1) Make sure that the scanner has the correct Y (U)-
cable for the system (a PC or terminal)
2) Turn off the power of the system
3) Unplug the keyboard from the system
4) Connect the Y (U)- cable to the system and
keyboard
5) Turn on the power of the system
6) If the indicator LED lights up and the buzzer
sounds, the scanner is ready for reading
To install a RS-232 interface scanner, the host device
should have a RS-232 port to receive data from the
scanner, follow the steps listed below:
1) Make sure that the scanner has the right connector
for the RS-232 port of the host device
2) Make sure that there is a power supply to the
scanner (if necessary)
3) Connect the cable to the RS-232 port of the device
4) If the indicator LED lights up and the buzzer
sounds, the scanner is ready for reading
Installing Keyboard Wedge Scanner
Installing a RS-232 Interface Barcode Scanner