Portwell ROBO-8914VG2AR Page 41 User Manual Download

Page: 41 / 80

BIOS Setup Information

ROBO-8914VG2AR User’s Manual

4-5

Intel(R) Virtualization Tech

A VMM can utilize the additional HW Caps, provided by Intel(R) Virtualization
Tech.

Note: A full reset is required to change the setting.
The choice: Disabled, Enabled.

Execute-Disable Bit capability

When disabled, force the XD feature flag to always return 0

The choice: Disabled, Enabled.

Core Multi-Processing

When disabled, disable one execution core of each CPU die.

The choice: Disabled, Enabled.

PECI

When enabled, enables PECI interface.

The choice: Disabled, Enabled.

Intel(R) Speed Step (tm) Tech

Disable: Disable GV3.
Enable: Enable GV3.

The choice: Disabled, Enabled.

Intel(R) C-STATE Tech

CPU idle is set to C2, C3, C4 State.

The choice: Disabled, Enabled.

Summary of Contents for ROBO-8914VG2AR

















































































Search results

Summary of Contents for ROBO-8914VG2AR

Reviews:

Related manuals for ROBO-8914VG2AR

Brands by name

Popular brands

Portwell ROBO-8914VG2AR, User Manual

Search results

Summary of Contents for ROBO-8914VG2AR

Reviews:

Related manuals for ROBO-8914VG2AR

Brands by name

Popular brands