System Installation
ROBO-8914VG2AR User’s Manual
3-6
3.3.3
On-board Fast Ethernet Controllers
Drivers Support
Please select Intel Ethernet driver from the ROBO-8914VG2AR Driver CD-title to
install those two integrated Intel
®
82567LM Gigabit Ethernet PHY for iAMT 5.0
function & Intel
®
82574L Gigabit Ethernet controller drivers.
Those two drivers
support Windows XP.
LED Indicator (for LAN status)
This provides two LED indicators to report Intel 82567LM & 82574L Gigabit Ethernet
interface status. Please refer to the table below as a quick reference guide.
Operation of Ethernet Port
82567LM
&82574L
Color
Name of LED
Linked
Active
Status
LED
Orange
LAN Linked & Active LED
On
Blinking
Orange
Giga
Mbps
100
Mbps
10 Mbps
Speed
LED
Green
LAN speed LED
Orange
Green
Off
3.3.4
On-board High Definition Audio Controller
Drivers Support
Please select the Realtek High Definition Codec Audio driver form ROBO-
8914VG2AR Driver CD-title.
The driver supports Windows XP.
3.3.5
Intel Matrix Storage Manager Device
Drivers Support
Please find utility tool for Intel ICH10DO of ROBO-8914VG2AR CD-title.
The drivers
support Windows XP.
Installing Serial ATA hard disks
The ROBO-8914VG2AR supports Four Serial ATA hard disk drives. For optimal
performance, install identical drives of the same model and capacity when creating a
disk array.
To install the SATA hard disks for a RAID configuration:
1. Install the SATA hard disks into the drive bays.
2. Connect the SATA signal cables.
3. Connect a SATA power cable to the power connector on each drive.