BIOS Setup Information
ROBO-8913VG2AR User’s Manual
4-5
SATA#1 Configuration
The choice: Disabled, Compatible, Enabled.
Configure SATA#1 as
This setting specifies the function of the on-chip SATA#1 controller.
The choice: IDE, RAID, AHCI.
SATA#2 Configuration
The choice: Disabled, Enabled.
Primary / Secondary / Third / Fourth IDE Master / Slave
While entering setup, BIOS auto detects the presence of IDE devices. This displays
the status of auto detection of IDE devices.
[Type] Press PgUp/<
＋
> or PgDn/<
－
> to select [Manual], [None] or [Auto] type.
you can use [Manual] to define your own drive type manually.
[LBA/Large Mode] Enabling LBA causes Logical Block Addressing to be used in
place of Cylinders, Heads and Sectors.
[Block (Multi-Sector Transfer)] Any selection except Disabled determines the
number of sectors transferred per block.
StockCheck.com
