System Installation
ROBO-8913VG2AR User’s Manual
3-1
Chapter 3
System Installation
Chapter 3 instructs you to set up system; the additional information is enclosed to
help you set up onboard PCI device and handle WDT operation in software
programming.
3.1 Intel
®
LGA 775 Processor
Installing LGA 775 CPU
1) Lift the handling lever of CPU socket outwards and upwards to the other end.
Following step A position to step B position (Figure 3-1).
Figure 3-1
2) Align the processor pins with pinholes on the socket. Make sure that the notched
corner or dot mark (pin 1) of the CPU corresponds to the socket’s bevel end. Then
press the CPU gently until it fits into place (see Fig.3-4). If this operation is not
easy or smooth, don’t do it forcibly. You need to check and rebuild the CPU pin
uniformly.
StockCheck.com
