Portwell ROBO-8122VG2R, User Manual

Page: 58 / 88

ROBO-8122VG2R
Copyright © Portwell 2017 ROBO-8122VG2R User's Guide 58
Feature Description Options
SATA Controller Enable or disable SATA Controller
★
Enabled, Disabled
Configure SATA as Identify the SATA port is connected to Solid State Drive or Hard Disk Drive
★
AHCI,IDE, RAID
SATA RSTe Boot Info
Enable setting provides full int13h support for SATA controller attached devices. CSM
storage OPROM policy should be set to legacy to make this selection effective.
★
Enabled, Disabled
Alternate Device ID on RAID Enable alternate device ID on RAID devices.
★
Disabled, Enabled
Load EFI Driver for RAID In RAID mode load EFI driver. (If disabled loads LEGACY OPROM)
★
Disabled, Enabled
Port 0 – Port 3 Enable or Disable SATA Port
★
Enabled, Disabled
Hot Plug Designates this port as Hot Pluggable
★
Disabled, Enabled
Configure as eSATA Configures port as External SATA (eSATA)
★
Disabled, Enabled
SATA Device Type Indentify the SATA port is connected to Solid State Drive or Hard Disk Drive.
★
Hard Disk Drive, Solid State
Drive