ROBO-6911VG2AR
Copyright © Portwell 2017 ROBO-6911VG2AR User's Guide
19
3.2 Jumpers Settings
For users to customize ROBO-6911VG2AR’s features. In the following sections, Short means covering a jumper cap over jumper pins; Open or N/C (Not
Connected) means removing a jumper cap from jumper pins. Users can refer to Figure 1 for the Jumper allocations.
Jumper Table
The jumper settings are schematically depicted in this manual as follows:
Connector Function List
Connector
Function
Remark
J1/JP1-JP4
Front Panel System Connectors
PH2Px1/2mm
J2/J9
DDR4 SO-DIMM Memory Sockets
DDR4-260P Foxconn
J3 SMBus
Connector
PH5Px1(-pin2)/2.54mm
J4/J5/J6/J7 SATA
Connector(6Gb/s)
SATA/Blue
J8
ATX 4Pin 12V Power Connector
MA 2Px2. ATX4PT-L.TechBest
J10
USB 2.0 Dual-Port Cable Connector PH5Px2(-pin9)/2.54mm
J11
LPC Port-80 Debug Port
PH5Px2(-pin9)/2.54mm
J12
USB 3.0 Dual-Port Cable Connector
BH10Px2/2mm/Blue
J13
DVI Port Video Cable Connector PH10Px2/1.25mm
DF13,Hirose
J14
COM1 Serial Port Cable Connector
BH5Px2/2mm
J15/J16
USB 3.0 Connector
UEA3119C-41B1-4H, Foxconn
J17
Gigabit Ethernet Magnetics Connector (LAN2)
RJ45 RT7-195AAM1F,UDE
