Trouble Shooting
ROBO-6710/6730VLA User’s Manual
5-3
Step 4: Please check the connection of the IDE Peripheral power connector properly
(CN1), which shows on Figure 5-1.
Step 5: Connect TOGGLE SWITCH with J7 connector on ROBO-6710/6730 series
(Figure 5-5), which is used to power on ATX Power Supply.
Figure 5-5
Step 6: The figure below is the TOGGLE SWITCH, which is used to switch the ATX
Power on/off for SBC. Usually the TOGGLE SWITCH is located on the
chassis front panel. Pressing the switch button once will turn power on, and
press again to turn it off. (Figure 5-6)
Figure 5-6
