Troubleshooting
PGB-5120S User’s Manual
5-1
Chapter 5
Troubleshooting
This chapter provides a few useful tips to quickly get PGB-5120S running with
success. As basic hardware installation has been addressed in Chapter 2, this chapter
will primarily focus on system integration issues, in terms of BIOS setting, and OS
diagnostics.
5.1
Hardware Quick Installation
ATX Power Setting
Unlike other Single board computer, PGB-5120S supports ATX emulation AT Mode.
However, there are only two connectors that must be connected—J13 (4 pins CPU
+12V main power connector) & J14 20 pins ATX Power Connector.
Serial ATA Hard Disk Setting for IDE/AHCI
Unlike IDE bus, each Serial ATA channel can only connect to one SATA hard disk at a
time; there are total four connectors, J19 & J20 two ports on-board support 3Gb,
because SATA hard disk doesn’t require setting up Master and Slave, which can
reduce mistake of hardware installation. Those two SATA ports also can support
SATA DOM when change the JP23 & JP24 jumper settings. All you need to operate
IDE and AHCI application for system please follow up setting guide in BIOS
programming (Table 5-1); Furthermore, you can consult chapter 4.3
Advanced “SATA Configuration” part of the” SATA Mode”.
