System Installation
PGB-5120S User’s Manual
3-5
7. Push the CPU socket lever back into its locked position.
8. Please make sure four hooks are in proper position before you install the cooler.
3.2
Main Memory
PGB-5120S provide 1 x204 pin DIMM sockets (Single Channel) which supports
1066/1333 DDR3-SDRAM as main memory, Non-ECC (Error Checking and
Correcting), non-register functions. The maximum memory can be up to 4GB.
Memory clock and related settings can be detected by BIOS via SPD interface.
For system compatibility and stability, do not use memory module without brand.
Memory configuration can be set to either one double-sided DIMM in one DIMM
socket or two single-sided DIMM in both sockets.
Beware of the connection and lock integrity from memory module to socket. Inserting
improperly it will affect the system reliability.
Before locking, make sure that all modules have been fully inserted into the card
slots.
Note:
To insure the system stability, please do not change any of DRAM parameters in
BIOS setup to modify system the performance without acquired technical
information