System Installation
FUDA2-S1x11 Series Panel PC User’s Manual
2-9
14.
CFEX:
CFEX is a new Compact Flash (CF) technology initiated by Portwell and adapting
legacy CF type one with advanced pin definitions. This helps overcome reliability
issues with standard commercial memory. CFEX also supports SATA 3.0, SPI and
other extensions, and achieves a read speed of 100 to 120Mbyte/s and write speed of
45 to 75Mbyte/s. Compared with other CF devices, it falls in the same low-cost
bracket as CF and CF SATA and is less expensive than CFAST.
15.
One PCIe x 1 Expansion:
The Panel PC supports one PCIe x1 expansion (x4 slot)
16.
Mounting Kits for connecting IPC box and touch panel display:
The PEDA Panel PC has two parts: IPC box and touch panel display connecting by
one single cable. Use the mounting kits to make sure a steady mechanical connection
between both.
17.
Panel Mount Hole:
The Panel PC can be mounted into a panel or a sub-frame for industrial cabinet via
panel mount holes and kits.
18.
Front Panel with seal at the rear side:
The Panel PC equips a Rugged Aluminum front bezel.
2.7 Mounting Method
2.7.1 Panel Mount
The Panel PC can be mounted into a panel or a sub-frame for industrial cabinet via
panel mount holes and kits. Check the installation guide and cut-out dimension
below.
*Note: In order to ensure the Panel PC to be protected against dust and water, mount
the system on a non-textured surface.
