System Installation
FUDA2-S1x11 Series Panel PC User’s Manual
2-6
2.5 Getting Started
It is easy to get the system started.
*Note: There are two types of power connectors on PEDA-S1x30 Series Panel PC.
Please connect the power supply to either “Terminal block” or “AC/DC Adaptor”.
Do not connect to both at the same time.
Step 1. Make sure the power supply
(12~24V) is connected properly
Step 2. Press the power button to turn on
the system
*Note: Power LED shines
BLUE when
system is “ON”
;
ORANGE when “OFF”
2.6 I/O Interfaces
2.6.1 Front View
1.
TFT-LCD Display with touch:
The Panel PC is built in a TFT-LCD display and designed with a 5-wire resistive
touch screen. The touch screen allows contacts of pen or finger to move the mouse
pointer but only functions normally after integrating necessary software.
*Note: Do not use a hard or a pointed object (like screw drivers or pliers) to operate
the touch screen.
*Note: P-CAP touch screen could be by project.
2.
Black Cover Lens of the touch screen
The Panel PC equips true-flat touch screen which comes with black cover lens.
3.
Aluminum Front Bezel:
Rugged Aluminum front bezel meets IP65 protection.
