manualshive.com logo in svg

Portwell PEB-2770VG2A, User Manual

The Portwell PEB-2770VG2A User Manual is available for download free of charge at manualshive.com. This comprehensive manual provides detailed instructions and information to optimize your usage of the PEB-2770VG2A product. Ensure you have a smooth experience by accessing our reliable and user-friendly manual.

Share
Download
background image

Troubleshooting 

PEB-2770/2780VG2A User’s Manual 

4-6 

 

ATA/IDE Configuration 

The choice: Disabled, Compatible, Enabled. 
 

Legacy IDE Channels 

The choice: SATA Only, SATA Pri,PATA Sec, PATA Only. 
 

Primary / Secondary / Third / Fourth /Fifth IDE Master / Slave 

While entering setup, BIOS auto detects the presence of IDE devices. This displays the 
status of auto detection of IDE devices.

 

 

 

Summary of Contents for PEB-2770VG2A












































































Reviews:

No comments

Related manuals for PEB-2770VG2A

ICP WAFER-5823 User Manual preview
WAFER-5823
Brand: ICP Pages: 50
Advantech AIMB-562 series Manual preview
AIMB-562 series
Brand: Advantech Pages: 59
Intertec Components ITM-EVA-328 Manual preview
ITM-EVA-328
Brand: Intertec Components Pages: 3
PC Partner P4M266AS4-258M Manual preview
P4M266AS4-258M
Brand: PC Partner Pages: 20
PC Partner 35891900 Series Manual preview
35891900 Series
Brand: PC Partner Pages: 16
IEI Technology WAFER-CV-N26001 User Manual preview
WAFER-CV-N26001
Brand: IEI Technology Pages: 135
Albatron PX845EV1 Series User Manual preview
PX845EV1 Series
Brand: Albatron Pages: 56
Microchip Technology MCP1012 User Manual preview
MCP1012
Brand: Microchip Technology Pages: 44
WynMax Atom D2550 User Manual preview
Atom D2550
Brand: WynMax Pages: 68
Gigabyte GA-686LX2 User Manual preview
GA-686LX2
Brand: Gigabyte Pages: 18
Xtralis VESDA LCD Programmer Module Product Manual preview
LCD Programmer Module
Brand: Xtralis VESDA Pages: 54
ECS P67H2-A4 Manual preview
P67H2-A4
Brand: ECS Pages: 92
Commell LV-67A User Manual preview
LV-67A
Brand: Commell Pages: 60
ON Semiconductor MT9M031I12STCH-GEVB User Manual preview
MT9M031I12STCH-GEVB
Brand: ON Semiconductor Pages: 5
Rohm KXTJ3-1057-EVK-001 User Manual preview
KXTJ3-1057-EVK-001
Brand: Rohm Pages: 3
Gigabyte GA-X99P-SLI User Manual preview
GA-X99P-SLI
Brand: Gigabyte Pages: 88
Gamefisher Gamefisher 298.586180 Owner'S Manual preview
Gamefisher 298.586180
Brand: Gamefisher Pages: 23
trimond IN440 Micro-ATX User Manual preview
IN440 Micro-ATX
Brand: trimond Pages: 47

Brands by name

Popular brands

Load more brands