System Installation
PEB-2770/2780VG2A User’s Manual
3-1
Chapter 3
System Installation
This chapter provides you with instructions to set up your system. The additional
information is enclosed to help you set up onboard PCI device and handle Watch Dog
Timer (WDT) and operation of GPIO in software programming.
3.1 Intel
®
N450/D510
- Intel® N450 (512K Cache, 1.66GHz, Max TDP 5.5 Watts)
- Intel®D510 (1M Cache, 1.66GHz, Max TDP 13 Watts)
3.2 Main
Memory
PEB-2780 provide 1 x 240pin SO-DIMM sockets which supports 667 DDR2-SDRAM
as main memory, Non-ECC (Error Checking and Correcting), non-register functions.
The maximum memory can be up to 2GB. Memory clock and related settings can be
detected by BIOS via SPD interface.
For system compatibility and stability, do not use memory module without brand.
Memory configuration can be set to either one double-sided DIMM in one DIMM
socket or two single-sided SO-DIMM in both sockets.
Beware of the connection and lock integrity from memory module to socket. Inserting
improperly it will affect the system reliability.
Before locking, make sure that all modules have been fully inserted into the card slots.
Note:
To insure the system stability, please do not change any of DRAM parameters in BIOS
setup to modify system the performance without acquired technical information.
