System Installation
PEB-2770/2780VG2A User’s Manual
3-2
3.3
Installing the Single Board Computer
To install your PEB-2780 into standard chassis or proprietary environment, please
perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure CPU and memory module on right position
Step 3 : Place PEB-2780 into the dedicated position in the system
Step 4 : Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that SBC is properly inserted and fixed by mechanism.
Note:
Please refer to section 3.3.1 to 3.3.7 to install INF/VGA/LAN/Audio drivers.
3.3.1 Chipset Component Driver
PEB-2780 uses state-of-art Intel® N450 CPU. It’s a new chipset that some old
operating systems might not be able to recognize. To overcome this compatibility
issue, for Windows Operating Systems such as Windows XP, please install its INF
before any of other Drivers are installed. You can find very easily this chipset
component driver in PEB-2780 CD-title.
