Troubleshooting
PEB-2738I User’s Manual
5-1
Chapter 5
Troubleshooting
This chapter provides a few useful tips to quickly get PEB-2738I running with
success. As basic hardware installation has been addressed in Chapter 2, this chapter
will primarily focus on system integration issues, in terms of BIOS setting, and OS
diagnostics.
5.1
Hardware Quick Installation
DC 12V Power Input
5.2 BIOS
Setting
It is assumed that users have correctly adopted modules and connected all the
device cables required before turning on DC 12V power. 200-pin DDR2 SO-DIMM,
keyboard, mouse, 44pin hard disk, VGA connector, device power cables, 12V DC
power accessories are good examples that deserve attention. With no assurance of
properly and correctly accommodating these modules and devices, it is very
possible to encounter system failures that result in malfunction of any device.
To make sure that you have a successful start with PEB-2738 it is recommended,
when going with the boot-up sequence, to hit “DEL” key and enter the BIOS setup
menu to tune up a stable BIOS configuration so that you can wake up your system
far well.
