System Overview
PEB-2738I User’s Manual
1-1
Chapter 1
System Overview
1.1 Introduction
Portwell Inc., a world-leading innovator in the Industrial PC (IPC) market and a
member of the Intel® Embedded and Communications Alliance (Intel ECA),
announced today the Portwell PEB-2738I utilizing the Intel® ECX form factor based
on the Intel® Atom™ processor Z500PT series and the Intel® System Controller Hub
US15WPT. The new micro-architecture of the Intel® platform will provide a range of
low power, wide temperature and fanless devices such as Panel PC, Kiosk, DS,
Medical, Military, Government and Industrial automation and control applications.
PEB-2738I is specifically designed to operate at a very low power consumption of
less than 10 watts at full loading. It supports dual independent display by LVDS and
SDVO daughter card (DVI/VGA/LVDS, by request).
Based on the Intel® Atom™ processor Z500PT series platform, the PEB-2738I takes
advantage of the processor’s very low power consumption, Ground-breaking power
management techniques and wide temperature so it can be a truly industrial
temperature and fanless configuration. In addition, the PEB-2738I supports DC 12V
input, one SO-DIMM memory slot for DDR2 SDRAM up to 2GB, and comes with
one IDE, one CompactFlash® socket, one SDVO connector (with one PCIE x1 and
USB signal), one gigabit Ethernet, two RS232, six USB2.0 and one SDIO connector.
PEB-2738I features:
z
Intel® Atom™ processor Z500PT series and System Controller Hub US15WPT
z
One 200-pin SO-DIMM support DDR2 SDRAM up to 2GB
z
Dual independent display: SDVO(by VGA/DVI/LVDS daughter card) and
24bit LVDS
z
One Gigabit Ethernet
z
TPM (Trusted Platform Module) could be added on board (optional)
z
Customization (Extension card): BTB connector with SDVO/USB/PCI-E x1
signal and SDIO pin header
z
Storage: One PATA / One CompactFlash / One USB Flash / One SDIO
z
12V DC input
