Portwell NAR-5050-310 User Manual Download | Manualshive

Page: 57 / 58

background image

NAR-5050/5070 Series User

’

s Manual

56

Chapter 3 Operation Guide

3.1 Brief Guide of PPAP-3710L-0200

PPAP-3710L-0200  is  a  Communication  Appliance  computing  board  based  on  Server  Works
CMIC-SL  chipset  technology.  PPAP-3710L-0200  has  three  on-board  LAN  ports  to  serve
communication  appliances,  such  as  Firewall,  which  needs  three  Ethernet  ports  to  connect
external  network  (internet),  demilitarized  zone  and  internal  network.  Different  I/O  management
policies  can  be  applied  respectively  to individual  network  to  achieve  the  highest  security level.
The target market segment is communication appliance including Virtual Private Network, Load
Balancing, Quality of Service, Intrusion Detection, Virus Detection, Firewall and Voice Over IP.

This PPAP-3710L-0200 system board is utilized with Intel® mPGA Celeron® and Intel® mPGA
Pentium® 4 processors, and 184-pin DIMM up to 4 GB DRAM. The enhanced on-board PCI IDE
interface supports 2 drives up to PIO mode 4 timing and Ultra DMA/100 synchronous mode
feature. The on-board Server Works CSB5 chipset integrates two serial ports driven by two high
performance 16C550-compatible UARTs to provide 16-byte send/receive FIFOs. In addition, the
two Universal Serial Bus ports provide high-speed data communication between peripherals and
PC.

The on-board flash ROM is used to make the BIOS update easier. The high precision Real Time
Clock/Calendar is built to support Y2K for accurate scheduling and storing configuration
information. All of these features make PPAP-3710L-0200 excellent in stand-alone applications.

If any of these items is damaged or missing, please contact your vendor and save all packing
materials for future replacement and maintenance.

Figure 3-1 PPAP-3710L-0200 Board

«
...
55
56
57
58
»

Summary of Contents for NAR-5050-310



























































Reviews:

No comments

Related manuals for NAR-5050-310

Brand: Sun Microsystems Pages: 74

Brand: MSI Pages: 112

Brand: IEI Technology Pages: 126

Brand: ASROCK Pages: 226

MAG Z490 TOMAHAWK

Brand: MSI Pages: 76

AnadigmApex AN231K04-DVLP3

Brand: Anadigm Pages: 16

Brand: Gigabyte Pages: 19

BeagleBone Black Proto Cape

Brand: sparkfun Pages: 4

SR1500AL - Server System - 0 MB RAM

Brand: Intel Pages: 180

Brand: IDT Pages: 39

GA-HA65M-D2H-B3

Brand: Gigabyte Pages: 104

Brand: ASROCK Pages: 125

Brand: ASROCK Pages: 153

MVME61006E-0161

Brand: Emerson Pages: 100

MVME6100 Series

Brand: Emerson Pages: 118

Brand: Emerson Pages: 122

Brand: Emerson Pages: 138

Brand: Emerson Pages: 146

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands