5.
Put the safety plate E to the handles as shown and mark
the places to make cutouts for the handles
.
4.
Screw the wall handles and keep the level
.
3.
Unscrew the wall handle before installation. Part 1 of the handle
should be placed against the facade at a height equal to the
height of the external blind measured from the bottom edge of
the window frame. The handles should be levelled to each other
and the place for drilling marked
.
6.
Make a cut for the wall handle hole in the marked places
in the safety plate. Then cut or break off a piece of metal
sheet in the places of mounting handles as shown above
.
7.
Attach the insulation component on the back side of the safety
plate E with double-sided tape or appropriate adhesive
.
8.
Fasten the guides with the appropriate screws to the window
frame
.
9.
Place the safety plate E, drill it with a ø 6 mm drill and then
screw the safety plate to the lintel with appropriately selected
screws
.
10.
Screw the top rail handle (middle hole) to the mounted
wall handle
.
10
1.
1.
ZF3000
EXTERNAL BLIND INSTALLATION
