3
SAVE THESE INSTRUCTIONS
For your safety, read and understand the information contained within. The owner and operator shall have an under-
standing of this product and safe operating procedures before attempting to use this product. Instructions and Safety
information shall be conveyed in the operator's native language before use of this product is authorized. Make certain
that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If
any doubt exists as to the safe and proper use of this product as outlined in this factory authorized manual, remove from
service immediately.
Inspect before each use.
Do not use if broken, bent, cracked or otherwise damaged parts are noted. If any component
of this product has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly
upon it), discontinue use until checked out by a Porto-Power Blackhawk Automotive Authorized Service Center. Owners
and operators of this equipment shall be aware that the use and subsequent repair of this equipment may require
special training and knowledge. It is recommended that an annual inspection be done by qualified personnel and that
any missing or damaged parts, decals, warning / safety labels or signs be replaced with factory authorized replacement
parts only. Any component of this Porto-Power Kit that appears to be damaged in any way, is worn or operates
abnormally shall be removed from service immediately until such time as it can be repaired/replaced. Labels and
Operator's Manuals are available from manufacturer.
PRODUCT DESCRIPTION
Porto-Power Kits are designed to be used for pushing, spreading, and pressing of vehicle body panels as well as
various component parts and assemblies. A variety of attachments are included. B65114 is rated 8,000PSI and B65115
is rated 10,000PSI, where rams are rated from 4 to 10 tons.
WARNING: when extension tubes and/or offset attachments are used, the rated capacity is always reduced
by 50% for each tube or offset attachment connected.
Refer to figure 3 on page 8 for more offset illustration.
SPECIFICATIONS
Figure 1 - B65114 and B65115 Components
Closed Height
Extended Height
B65114
4 Ton
11"
15 3/4"
14
46 lbs
B65115
10 Ton
13 5/8"
19 3/4"
13
88 lbs
Model
Ram
Number of
Attachments
Weight
Capacity
Dust Cover
Oil Filler Screw
Handle
Release Valve
Ram Plunger
Hose
Hose
Coupler
Ram Coupler
Ram
Summary of Contents for PORTO-POWER B65114
Page 12: ...memo ...
