2
H1/6 Purple wire –––300mA optional trunk output –
This feature allows you to remote control trunk release. Because the output current is maximum 300mA,it is
necessary to connect a relay in order to amplify the drive current.
H1/7&H1/18 Green wire –––Cut relay COM
The two wires connect to the cutter relay COM contract; the two wires have already been connected together on
PCB. The reason that uses two wires is to increase the current of cutter relay. When the system is armed, the two
wires will connect to the other two cutter relay wires(H1/8&H1/19).
H1/8&H1/19 Yellow/Green wire –––Cut relay NO
The two wires connect to the cutter relay NO contract; the two wires have already been connected together on
PCB. The reason that uses two wires is to increase the current of cutter relay. When the system is armed, the two
wires will connect to the other two cutter relay wires (H1/7&H1/18).
H1-9 Blue/White wire--- Lock COM
H1/9,H1/10,H1/11,H1/20,H1/21,H1/22 connect to the central door locking. See the drawing below.
H1-10 Orange/Blue wire--- Lock NC
H1/9,H1/10,H1/11,H1/20,H1/21,H1/22 connect to the central door locking. See the drawing below.
H1-11 Brown/Blue wire--- lock NO
H1/9,H1/10,H1/11,H1/20,H1/21,H1/22 connect to the central door locking. See the drawing below.
H1-14 Red wire--- Red wire – System power (+12V Constant)
The RED wire supplies power to the system. Connect this to a co12 volt source.
Fuse Box
BATTERY
12V
Red
Fuse 5A
H1-15 white/Red wire--- Siren output
This wire is for Siren, connect it to the RED wire of the siren, the BLACK wire of the siren connect to (-) chassis
ground.
This wire can be also connected to a horn if the customer ask for . Because the output current is maximum
300mA,it is necessary to connect a relay in order to amplify the drive current.
H1-16 Red wire---parking light input
This wire should be connected to a co12 volt source. It offers the power of the parking light.
H1-17 Orange wire--- (-) parking light output
This wire should be connected to the (+) parking light wire. It will supply a (+) 15A output. If the parking light
polarity fuse jumper inside the unit is moved to opposite position, this wire supplies a (-) 15A output.
