7
Intelligent report (combine time and distance)
Keep alive report
Event Report
Temperature report
Speeding report
Low battery report
Geo-fence trigger report
ALARM trigger report, e.g. PANIC mode, ARM, ignition inputs, etc …
History data store 3000 report can be saved in unit, and read from server and pc-setup
III.
S
TATUS INDICATOR
S
YSTEM
LED:
R
ED
:
Power indicator. When the unit power on, the led will light all the time. When
power cut off the unit works with backup battery, the led will flash until all the report is
sent to server.
Y
ELLOW
:
GSM/GPRS indicator. Yellow LED will flash when the device is connected
to the server with valid GPRS connection. It will stay continuously on when it is in GSM
mode. It will stay off if there is no GSM reception.
G
REEN
:
GPS indicator. This LED will be ON when the unit received a valid GPS data.
Note that the YELLOW and Green LEDs indication will not be valid until the system goes
to the working mode, normally 30 seconds after power on.
IV.
PC
SETUP AND SYSTEM INITIATION
PC setup Procedure:
(1.) Connect the 4 pin USB cable to the DB9 port.
(2.) Open the PC setup program.
(3.) Select the correct COM port for communication.
(4.) Power on the device or press the reset button for at least 2 second.
(5.) Click “ok” to start the program
Note that, if the connection fails, please check the cable connection is secured correctly.
Press the reset button for a longer time, e.g. another 3 seconds.
