Page 7
For technical questions, please call 1-800-444-3353.
Item 63190
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
A
SSEM
b
Ly
Assembly Instructions
Read the ENTIRE IMpORTANT SAFETy INSTRUcTIONS section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Release the Trigger and unplug the appliance from its electrical
outlet before assembling or making any adjustments.
Note:
For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Install Guide bar and Saw chain
cAUTION!
Wear heavy-duty work gloves when handling Saw chain.
1.
bEFORE FIRST USE:
Soak Saw Chain in bar
and chain oil (sold separately) overnight.
2. Remove Drive Cover Hex Bolt using Hex Wrench
end of included tool, then remove Drive Cover.
Drive
cover
Drive cover
Hex bolt
3. Loosen Tensioning Screw using
Screwdriver end of tool.
Tensioning
Screw
4. Slide Saw Chain’s drive links into
Guide Bar’s groove, making sure chain is
installed in correct rotation direction.
Drive
Link
Groove
Guide
bar
Rotation
Direction
Symbol
5. Place Saw Chain around Drive Sprocket, place
Guide Bar’s lower oil hole over Tension Pin.
Drive
Sprocket
Tension
pin
6. Tighten Tensioning Screw until bottoms
of cutters contact bottom of Guide Bar,
then tighten an additional 1/4 turn.
7. Replace Drive Cover, then tighten
Drive Cover Hex Bolt.
8. Tension Saw Chain according to
Tension
Saw chain on page 8.
