11
ASSEMBLY AND ADJUSTMENTS
Estimated Assembly Time: 50 - 60 minutes.
For your safety, never connect plug to power
source receptacle until all assembly and
adjustment steps are complete, and you have
read and understood the safety instructions.
ASSEMBLING CABINET STAND
(FIG. A, A-1, A-2, A-3, A-4, A-5)
1.
Bag “A” -
Thread the feet (2) with the
hex nut (1) into each hole of two side
plates (3, 8).
NOTE:
Adjust the level of stand. When the
feet are adjusted properly, turn the hex nuts
against the leg of side plate to secure them.
Loosen the hex nut before any adjustment.
2.
Bag “B” -
Attach R.H. side plate (3) (with
holes on side) to the tool tray (4) with
four carriage bolts (5) and hex nut
w/ washers (6).
3. Repeat above steps for the L.H. plate (8).
Securely tighten nuts.
4.
Bag “B” -
Attach top plate (7) to the
L.H. side plate (8) and R.H. plate (3)
with eight carriage bolts (5) and hex nut
w/ washers (6).
NOTE:
Top plate flanges
fit inside side plates.
1
2
3
WARNING
!
Fig. A
Fig. A-1
3
4
5
6
Magnet
Front
5.
Bag “B” -
Mount the back plate (9) to the
top plate (7) and tool tray (4), then fasten
with four screws w/ washers (10).
6.
Bag “C” -
Insert the door knob (11) to
the hole of door plate (12) with one hex
screw (13) and washer (14).
3
4
10
9
7
8
13
14
11
12
8
3
5
7
6
Magnet
Front
Fig. A-2
Fig. A-3
Fig. A-4
