background image

5- ENG

D25805

RISK OF
UNSAFE 

OPERATION

• Reactive force of spray will cause

gun/wand to move, and could
cause the operator to slip or fall, or
misdirect the spray. Improper
control of gun/wand can result in
injuries to self and others.

• Do not overreach or stand on an

unstable support. Grip gun/wand
firmly with both hands. Expect the
gun to kick when triggered.

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Unsafe operation of your pressure

washer could lead to serious injury
or death to you or others.

• Do not use chlorine bleach or any

other corrosive compound.

• Become familiar with the operation

and controls of the pressure washer.

• Keep operating area clear of all

persons, pets, and obstacles.

• Do not operate the product when

fatigued or under the influence of
alcohol or drugs. Stay alert at all
times.

• Never defeat the safety features of

this product.

• Do not operate machine with

missing, broken, or unauthorized
parts.

• Never leave wand unattended while

unit is running.

If proper starting procedure is
not followed, engine can
kickback causing serious hand
and arm injury.

• If engine does not start after two

pulls, squeeze trigger of gun to
relieve pump pressure. Pull
starter cord slowly until
resistance is felt. Then pull cord
rapidly to avoid kickback and
prevent hand or arm injury.

• The spray gun/wand is a powerful

cleaning tool that could look like a
toy to a child.

• Keep children away from the

pressure washer at all times.

• Contact with hot surfaces, such

as engines exhaust components,
could result in serious burn.

• During operation, touch only the

control surfaces of the pressure
washer. Keep children away from the
pressure washer at all times. They
may not be able to recognize the
hazards of this product.

RISK OF

HOT

SURFACES

RISK OF

ELECTRICAL

SHOCK 

• Spray directed at electrical outlets

or switches, or objects connected
to an electrical circuit, could result
in a fatal electrical shock.

• Unplug any electrically operated

product before attempting to clean
it. Direct spray away from electric
outlets and switches.

RISK OF INJURY

FROM SPRAY

• High velocity fluid spray can

cause objects to break, propelling
particles at high speed.

• Light or unsecured objects can

become hazardous projectiles.

• Always wear ANSI approved Z87

safety glasses.Wear protective
clothing to protect against accidental
spraying.

• Never point wand at, or spray people

or animals.

• Always secure trigger lock when

wand is not in service to prevent
accidental operation.

• Never permanently secure trigger in

pull back (open) position.

Summary of Contents for D25805-025-1





















Reviews: