6- ENG
A07708
ASSEMBLY INSTRUCTIONS
3.
Connect wand to
gun. Tighten securely.
2.
Attach high
pressure hose
to gun. Tighten
securely.
1.
Place handle assembly onto frame,
depress the snap buttons, and
slide the handle assembly onto the
frame until snap buttons snap into
place.
CARTON CONTENTS
Engine Frame and
Wheel Assembly
High Pressure
Hose
Spray Gun
Quick Connect Spray Wand
Handle
Chemical
Hose
Bagged Parts
Nozzle
Cleaning
Tool
Engine
Manual
Quick
Connect
Nozzles
Nozzle
Holder
4.
Place the nozzle holder onto
the panel (located on the handle
assembly) and push each nozzle
holder into place.
5.
Remove five colored quick
connect nozzles from plastic
bag and insert them into correct
grommet on the nozzle holder.
NOTE:
Nozzles are color coded
to match colored nozzles on
panel.
Operation
Manual
Formed
Rubber
Covers
6.
Slide the formed rubber covers
onto the handle's on-board hose
and wand storage.
Engine
Oil
7.
Add engine oil (supplied)
to engine. Refer to Engine
Owners Manual supplied by
engine manufacturer for correct
procedure.
NOTE:
There will be a slight amount
of oil in the engine from factory
testing.
NOTE:
The high pressure pump was
filled with oil at the factory. There is no
need to add oil at this time, see the
Maintenance section of this manual
for Maintenance information.
Summary of Contents for A07708-0412-0
Page 17: ...17 ENG A07708 NOTES...
