11- ENG
A07708
Manual for correct procedure.
NOTE:
When engine rope is
pulled, pressure starts building
in the gun. If the engine does not
start after two pulls, pull the gun
trigger to relieve this pressure.
9. Depress trigger on gun to
start water flow.
NOTE:
Stand
on a stable surface
and grip
gun/spray wand firmly with both
hands. Expect the gun to kick
when triggered.
10.
Release trigger to stop water
flow.
11. Adjust spray for the task
being
performed by changing quick
connect nozzle. See How To Use
Spray Wand instructions in this
section.
SHUTTING DOWN
1. After each use,
if you have
applied chemicals, place chemical
hose into container of clean water
and draw clean water through
chemical injection system to rinse
system thoroughly.
NOTE:
Failure
to do so could cause damage to
the pump.
2. Turn engine off.
See Engine
Owner’s Manual.
NOTE: NEVER
turn the water off with the engine
running.
3. Turn water source off.
4. Pull trigger on spray gun
to
relieve any water pressure in
hose or spray gun.
5. See Storage section
in this
manual for proper storage
procedures.
STARTING
Prior to starting, refer to your engine
manual for proper starting procedure.
1. In a well ventilated outdoor
area
add fresh, high quality,
unleaded gasoline with a pump
octane rating of 86 or higher. Do
not overfill. Wipe up spilled fuel
before starting the engine. Refer
to Engine Owners Manual for
correct procedure.
2. Check engine oil level.
See
Engine Owners Manual for correct
procedure.
NOTE: There will
be a slight amount of oil in the
engine from factory testing.
3. Verify the filter
screen
is in
water inlet of
pump.
NOTE:
Cone side
faces out.
4. Connect
water source to pump
inlet.
NOTE:
Water source must
provide a minimum of 5 gallons per
minute at 20 PSI.
5. Connect
high pressure hose to
pump outlet.
6. If applying a chemical or
cleaning solution
, see How
To Apply Chemicals/Cleaning
Solvents instructions in this
section.
7. Turn water source on.
NOTE:
Failure to do so could
cause damage to the pump.
8. Start engine.
See Engine Owners
Filter Screen
High Pressure Hose
Water
Source
Summary of Contents for A07708-0412-0
Page 17: ...17 ENG A07708 NOTES...
