105
EN
(**) See page 101
(***) See page 23
(****) See page 21
Your machine
does not
discharge
Your machine
vibrates.
Discharging hose
clogged or twisted.
Pump filter clogged.
Your machine’s feet
are not adjusted.
Transportation
Safety screws are
not removed.
Your machine
only has a small
amount of laundry
inside.
Your machine is
overloaded with
laundry or the
laundry is not
distributed evenly.
Your machine rests
on a hard surface.
Adjust the feet of your
machine. (***)
Remove the transportation
safety screws from your
machine (****)
This will not prevent the
operation of your machine.
Do not put more laundry
in than the amount
recommended and make
sure it is loaded evenly.
Avoid installing your
machine on hard surfaces.
When settling your
machine, leave 2 cm
space between it and walls
or hard surfaces.
Clean the pump (**)filter.
Check the discharging
hose.
FAULT
POSSIBLE CAUSE REMOVING METHODS