104
EN
Troubleshooting
All repairing operations required for your machine should be
carried out by an authorized service company EURO-PARTS. If
your machine requires a repair or if you cannot solve an issue
with the information provided below, then you should:
• Unplug the machine.
• Close the water tap.
• Contact the nearest authorized service company.
(*) See page 98
Your machine
will not start.
No water is
entering the
machine.
Start/Pause button
is not pressed.
Press the start/pause
button.
The program knob
is in stop (off)
position.
Set the program knob to
the desired position.
The door your
machine is not
closed properly.
Close the door of your
machine.
Your fuse is defective.
Check the water
inlet hose.
Water inlet hose
may be blocked.
Valve inlet filter is
blocked.
The door of your
machine is not
closed properly.
Close the door of your
machine.
Clean the water inlet hose
filters.(*)
Clean the valve inlet filters.
(*)
Change your fuse.
Water inlet hose may be
twisted.
It is not plugged in.
Your tap is closed.
Insert the plug into the socket.
Open the tap.
Mains supply is cut off. Check the mains supply.
FAULT
POSSIBLE CAUSE REMOVING METHODS