Gas pressure regulator
A pressure regulator that is convertible
from natural to LP gas (Propane) or vice
versa is included with the appliance.
The included regulator corresponds
with the gas type of the cooktop. Verify
before installing.
The
adjusted
pressure
is:
natural
gas
-
5
"
w.c.
LP
gas
-
10"
w.c.
a
Cooktop
b
½" NPT
c
Regulator
As
shown
in
the
above
diagram,
the
included
regulator
must
be
used
when
connecting
the
cooktop
to
your
gas
supply.
Make
sure
the
regulator
is
easily
accessible
for
adjustment
after
the
appliance
has
been
installed.
For convenience, an AGA or CGA
approved flexible stainless steel gas
hose (accordion type) may be used
between the gas connection and the
regulator. This will allow the appliance
to be lifted out of the countertop for
cleaning or servicing. Make sure that
any drawers, cabinet doors, etc., do not
rub on this gas hose.
Do
not
use
any
regulator
unless
it
has
been
supplied
by
....
.
Doing
so
may
cause
a
gas
leak.
If
there
is
any
doubt
concerning
installation
contact
the
Technical
Service
Department:
After connecting the appliance check
all fittings for gas leaks e.g. with
soapy water.
When installed properly, the flame will
be steady and quiet. It will also have a
sharp, blue inner core that will vary in
length proportional to the burner size.
Flame adjustment will not be
necessary.
Gas connection
28 di 3
1
ATTENTION
MAXIMUM GAS-SUPPLY
PRESSURE, ALL MODELS
½ psi