manualshive.com logo in svg

Porter & Charles 174973, User Manual, Page: 12 / 31

Share
Download
Porter & Charles 174973 User Manual Download Page 12

 

13

G -  Ceramic Cooktop Control Panel 

 
 
 
 
 
  Ceramic Cooktop Controls: 

 

 

 

 

Switch controlling 
the left, front

 

Turning the knob clockwise
 activates the full hot plate.

Switch controlling 
the right, front 
hot plate.

Switch controlling 
the right, back 
hot plate.
Turning the knob clockwise
 activates the full hot plate.

Switch controlling the left,
 back hot plate.

 

 

To operate Single (inner zone) and separate Dual (inner + outer zone) follow 
this procedure:

 

  

a/ Inner Zone

 - rotate control knob in clockwise direction selecting power from positions 1 through 12. 

The inner zone only will operate. 

  

b/ Inner + Outer Zone = Full Power

 - rotate control knob clockwise through position 12 as above, then 

through to the Dot on control panel only -  a click will sound (do not Rotate control knob all the way to 
OFF position as this will turn power OFF).  Then rotate control knob backwards (anticlockwise) selecting 
power level from 1 to 12 as before. This will activate both Inner and Outer zones concurrently for 
maximum power. 

  

c/ To deactivate (turn off)

 Inner Zone or Inner + Outer Zone the control knob must be returned to the OFF 

position 

  

Important Note:  

1/ DO NOT TURN CONTROL KNOB ANTICLOCKWISE FROM OFF POSITION AS THIS 
WILL DAMAGE THE CONTROL MECHANISM - OPERATE SINGLE AND DUAL ZONES 
STRICTLY ACCORDING TO THE INSTRUCTIONS AS ABOVE.

  

 
 

 

 
 

Summary of Contents for 174973
































Reviews:

No comments