manualshive.com logo in svg

Portek ScatterBird MK4, Operator'S Handbook Manual, Page: 40 / 44

Share
Download
Portek ScatterBird MK4 Operator'S Handbook Manual Download Page 40

40

Troubleshooting

9. 

Make sure all the contacts are clean and free 
from corrosion: 

•  Corroded earth: Remove the back plate and 

unscrew the earth wires. Clean the connectors 
and the earth point with emery cloth and 
reassemble, using Vaseline (petroleum jelly) to 
protect against future corrosion.

•  Spark plug maintenance: Remove the rubber 

cap and unscrew the plug lead followed by 
the spark plug. Clean the thread, reset the gap 
using a £1 coin and reassemble making sure 
you replace the rubber cap.

•  Spark generator contacts: Take the spade 

terminals off the spark generator, clean the 
contacts, and replace using petroleum jelly to 
protect if needed.

 

This troubleshooting guide should solve the 
most common problems you might have 
with the Scatterbird MK4.

  If it still does not fire after these checks, 

then get in touch with you local dealer or 
Portek for further information, parts or 
technical assistance. 

  Portek will also repair or service your 

Scatterbird MK4 if required.

IF YOU HAVE WORKED THROUGH THE 
INSTRUCTIONS & THE TROUBLE SHOOTING 
GUIDE AND YOU ARE STILL HAVING PROBLEMS 
THEN CHECKOUT OUR VIDEO AT:

WWW.SCATTERBIRD.CO.UK

IF YOU CONTINUE TO HAVE PROBLEMS WITH 
YOUR SCATTERBIRD MK4, THEN PLEASE CALL 
OUR DEDICATED HELPLINE ON:

01234 889 460

Summary of Contents for ScatterBird MK4













































Reviews:

No comments