Portek Post Driver, Operator'S Handbook Manual

Page: 4 / 20

4
Important safety information
FOLLOW INSTRUCTIONS FOR CHANGING ACCESSORIES.
Do not store in a closed area where fuel vapours can reach an open flame from hot
water heaters, furnaces etc. Store in a locked, well ventilated area only.
Use only PORTEK equipment parts when servicing the unit, this will ensure safe and proper
performance of your product. These parts are available from your dealer. The use of any other
accessories or attachments may cause a potential hazard to the user, damage to the machine
and void this warranty.
When refuelling, be sure to stop the engine. NEVER refuel when the engine is running or has
overheated. When gasoline spills, be sure to wipe it up completely and properly dispose of
those materials before starting the engine.
Stay clear of other workers or bystanders by at least 15 metres/50 feet.
Whenever approaching an operator of the machine, carefully call his attention and confirm the
operator stops the engine. Be careful not to startle or distract the operator which can cause an
unsafe situation.
Pay attention to loosening and overheating of parts. If there is any abnormality of the machine,
stop operation immediately and check that machine carefully. If necessary, have the machine
serviced by an authorised dealer. Never continue to operate a machine which may be
malfunctioning.
In start-up or during operation of the engine, never touch hot parts such as the muffler, the
high voltage wire or the spark plug.
After the engine has stopped, the muffler is still hot. Never place the machine in any places
where there are flammable materials (dry grass etc.) combustible gasses or combustible
liquids.
AFTER USE
Clean the machine completely, especially the fuel tank, its surroundings and the air cleaner.
!