MT-350 Operation Manual 7
communicating time of 4:30, and hang up it at about 4:55. If correct, the
MT-350 will beep up once in response. If not correct, the MT-350 then will
beep up four times consecutively instead.
Default setting = 00
(5)GSM function of dialing out the prompt voice
Format: *#** [Waiting for confirming voice]
530101# turn off prompt voice.
530202# turn on prompt voice (default).
Default setting = 02, turn on this function.
(6)When not connecting to Telephone Office line, GSM will provide the forced
dial-out function
Format: *#** [Waiting for confirming voice]
550101# turn off function of forced dial-out.
550202# turn on function of forced dial-out (default)
Default setting =02, to turn on this function.
(7)Set up GSM extra dialing local code
When both GSM and PSTN dial local code, the difference between them is that
GSM has to extra dial up local code whereas PSTN needs not. This function
applies to the condition that when PSTN has been cut and user dials local phone
No., system thus will add in local code automatically and dial out from GSM.
Format: *#** [Waiting for confirming voice]
63aabb#
aa means code limit. There are still certain restrictions when auto-adding local
code, such as that the service or emergent phone calls need not to add extra
code dialing action. This setting is that when the total phone number length
inputted is shorter to the setting value, then MT-350 won’t extra dial local code. bb
means local code (2~8 digitals), it isn’t contained in the original code while dialing
out through GSM, and MT-350 will auto-add it in advance.
Example:
*#**630604#, if the head code isn’t “0” (04), and total code number
isn’t less than 6, then when dialing out form GSM it will dial “04” ahead
