MT-350 Operation Manual 14
Restrict number setting
Format : *#** (wait for confirming voice)
37aabbbbbb#
aa should be 2 digits ranges from 00 to 09 as restrict code
bbbbbb : the number to be associated with the restrict code, max. 15 digits
!!Note : the function cod 99 (reset to factory setting) doesn’t affect the restrict
code number setting
14. Echo Cancel Function
*#**20NNNN#
NNNN= 0101
Echo Cancel Enable
NNNN= 0202
Echo Cancel Disable
Default: 0202
15. Q&A
Q1: “PWR” lamp doesn’t light up after power on
？
A : No power transmitted to power plug, or the transformer is mal-functioned.
Q2: No further vocal sound heard after picking up the phone
？
A : Phone line is disconnected or wrong wire connected.
Q3: Why the “Busy Tone” is heard directly wile picking up phone
？
(Not linked to
PSTN)
A : GSM isn’t ready yet, it might occur from the reasons of disconnecting antenna,
not able to receive signals or equipment mal-functioned.
Q4: How to set up allow-to-dial number
？
A : Step I: connect a call receiver at phone.
