background image

Warranty

Warranty Limitations

The limited warranty period should appear on your warranty card.  If not contact your
retailer for any information about the limited warranty.

The warranty does not apply to:

- Batteries
- Damaged front panel and loading tray
- The damages or problems resulting from misuse, abuse, accident, 

alteration or incorrect electrical current or voltage.

- Any product without warranty or serial number label, or shipped without it's

warranty card

FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a resi-
dential installation. This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instruction manual may cause
harmful interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause interference
to radio or television reception, which can be determined by turning the equipment off
and on, try to correct the interference by one or more of the following measures:
• Relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet of a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this
device could void the user's authority to operate the equipment.

FCC Part 15
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference that may
cause undesired operation.

Summary of Contents for ST24XCDR




















Reviews: