Installing Sliding Screw Casing
1. Install the 35x8mm screw casing
(Parts #12)
*The screw casing location is adjustable and
can be fixed anywhere between 55mm to
100mm from the spindle
2. Depending on the location of where the
hole was drilled set the screw casing, then
tighten
Connecting Interior & Exterior Panel and Wires
1. Set the front and back panel (Part #1 & 2)
along with the rubber gaskets (Part #6) on
the door
2. Connect the wires from the interior panel
to the exterior panel (just plug and click)
3. Connect the front & back panel using the
screw
11
