911 (996)
9
9112
ENU
56/20
Technical Information
Figure 15.5
Secure ground line at the ground
points. Re-install black connector
on the amplifier.
5.6
Slide device with retaining frame into the
installation slot and complete the vehicle.
5.7
Read out the fault memory and clear it if
necessary. Faults that are present following
installation and are not deleted can be
ignored.
Important note:
The device cannot be
diagnosed for technical reasons. As a result,
the following faults will be entered in the fault
memory.
•
9114 PCM control unit
•
9151 Unknown error
The faults do
not
affect other functions in the vehicle and can be
ignored
.
6
Note:
On vehicles (1997–2002) with M662 (PCM1), the amplifier output must be activated in the
Porsche Classic Communication Management Plus (PCCM Plus). Unless this is activated, no sound
will be heard from the loudspeakers when the device is switched on.
No 12-volt output voltage is emitted on the mini ISO connector (yellow) pin 6. To activate this, please
proceed as follows:
6.1
Select the
Settings
button in the HOME screen.
Figure
16
Aug 31, 2020
Page
10
of
12
AfterSales
