28
Driver’s Manual
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
EL
CZ
HU
PL
HR
SR
SK
SL
ET
LT
LV
RO
BG
MK
Disconnecting the supply cable
Fig. 3: Disconnecting cables
b
Charging of the high voltage battery has ended
and the vehicle plug has been removed from the
vehicle charge port.
b
The plug has been disconnected from the
electrical socket.
1.
Remove screw
C
using a suitable tool.
2.
Lift the lever
A
.
3.
Pull out the plug
B
until resistance is first felt.
4.
Close the lever
A
.
5.
Pull out the plug
B
fully.
Securing supply cables and plugs
Fig. 4: Securing cables and plugs
b
The lever
A
is closed.
1.
Insert the plug
B
into the control unit until
resistance is first felt.
2.
Lift the lever
A
.
3.
Push in the plug
B
fully.
4.
Close the lever
A
.
5.
Secure the plug
B
to the control unit using
screw
C
.
Control Unit
Fig. 5: Control unit
The operating state of the control unit and charging
current limiting can be set using the ON/OFF
button
.
The control unit can be reset using the reset
button
if residual current is detected.
A
ON/OFF button with indicator light and
additional charging current limiting function
B
Power supply/domestic connection indicator
light
Vehicle indicator light
Control unit indicator light
C
Reset button with indicator light
9Y0000003B-EU.book Page 28
