7
Scope of supply
Serial number of the charger
The serial number of the charger can be found in the
following places:
–
In the letter containing access data after the
designation
Serial number
–
On the identification plate (on the back of the
control unit) after the abbreviation
SN
–
In the Web Application:
Settings
e
Mainte-
nance
e
Device information
Resetting to factory settings
All your settings will be deleted if you activate this
function. Moreover, all passwords will be reset to the
initial passwords indicated in the letter containing
your access data.
Information
This function is deactivated as standard in the
charger. In order to execute this function in the
charger, it must be enabled in the Web Applikation
(
Settings
e
System
e
Allow reset to factory set-
tings
).
1.
Press and hold the
CHARGE STATUS
button and
the
MULTI-FUNCTION BUTTON
simultaneously
for 5 seconds. The
CHARGER
indicator light
flashes white when you do so.
2.
As soon as the
CHARGER
indicator light stops
flashing, release the
MULTI-FUNCTION BUTTON
and keep the
CHARGE STATUS
button pressed
for 2 seconds.
3.
Press and hold the
MULTI-FUNCTION BUTTON
again for 5 seconds.
The
CHARGER
indicator light flashes white when
you do so.
🡆
The charger is reset to the factory settings.
In the meantime, the indicator lights light up
green.
The device is ready for operation once the
self-test has been completed successfully.
Resetting to factory settings is also possible via the
web application or at a qualified specialist workshop.
Porsche recommends a Porsche partner as they have
trained workshop personnel and the necessary parts
and tools.
For information on the Web
Application, see the instructions
at https://www.porsche.com/international/about-
porsche/e-performance/help-and-contact/
If you require a different language, please select the
appropriate website for your country.
