23
DE
EN
ES
FR
IT
NL
PT
RU
JA
ZH
KO
Selecting a suitable installation
location
The compact charging pole is designed for instal-
lation in indoor and outdoor areas.
When selecting a suitable location, the following
criteria should be taken into consideration:
e
Install the operating unit where it is protected
from direct sunlight.
e
Do not expose the charging pole to direct hose
water (e. g. from high-pressure cleaners or
garden irrigation).
e
Do not install the charging pole underneath
suspended objects.
e
Do not install the compact charging pole in
stables, barns and locations where ammonia
gas occurs.
e
Install the compact charging pole on a firm base.
Recommended installation sequence
1.
Prepare the foundation (with empty conduit
and anchor rods).
2.
Lay the cable for the circuit breaker to the
foundation.
3.
Install the compact charging pole.
4.
Have the power supply installed by a qualified
electrician.
Preparing the foundation
DANGER
Electric shock, short
circuit, fire, explosion,
flames
e
Do not install the compact charging pole in
explosion-prone areas.
e
Comply with the local applicable electrical
installation regulations, fire precautions and
accident prevention regulations and make sure
not to block any emergency escape routes.
e
Take note of the operating unit safety instruc-
tions and implement them for use in the
compact charging pole.
e
Protect sockets and connectors from humidity,
water and other liquids.
e
Damaged components must not be used and
must be switched off via the preliminary fuse
and locked out against inadvertent restart.
Information
– Install the compact charging pole such that it is
not located in the area of emergency escape
routes or walkways and that the charging cable
does not cross any emergency escape routes
or walkways.
– Install the compact charging pole such that the
distance between the charging plug and the
vehicle does not exceed the available cable
length.
– Check the condition of the foundation prior to
installation to ensure secure fastening.
Information
If a firm ground is available that complies with the
static calculation and is provided with a suitable
possibility for cable feed, no separate foundation
is required. In such a case, the compact charging
pole can be installed directly on the existing ground.
Summary of Contents for 971044033
