Porsche 928 GT1991, Owner'S Manual

Page: 19 / 154

Seat position memory
The seat position memory can store up to
three different sitting positions. Each posi-
tion stored in the memory comprises lon-
gitudinal adjustment, seat height, backrest
angle, position and size of lumbar support
and the position of the outside mirrors. The
positions can be adjusted, stored or called
up regardless of whether the engine is on or
off.
20
Selecting a position
Adjust the seat and the two outside mirrors
to the desired position by operating the
switches for seat and mirror adjustment,
Storing a position
To store a position in the memory, press the
memory button (arrowed) and the approp-
riate position button (button 1, 2 or 3). The
memory button must be pressed before the
position button.
Calling up a position
To set the seat to the position stored in the
memory, the appropriate position button
must be depressed until the seat reaches its
final position. The procedure is curtailed
as soon as the button is released. The but-
tons are illuminated for ease location.
Once the seat reaches its end position the
mirrors are set automatically to the positions
stored in the memory.
The seat switches always take priority over
automatic adjustment. If a seat switch is op-
erated, automatic adjustment is immediately
interrupted.
Pilot lamp
A red pilot lamp is set in the memory button.
If adjustment is initiated, the pilot lamp lights
up until the adjustment is completed. If the
procedure is interrupted, the lamp goes out
approx. 60 seconds after the ignition is
switched off.