Porsche 928 GT1991, Owner'S Manual

Page: 100 / 154

Replacing bulbs
To avoid short circuits, turn off the respective
electrical components when changing light
bulbs.
Keep bulbs free of grease and dirt. Hold
them only with a clean cloth or soft paper. H e a d l i g h t s
Do not use chemical cleaning agents for
( h i g h b e a m
'
l o w b e a m )
the plastic lenses. Plastic lenses should
only be cleaned with water or a mild soap/
water solution.
We recommend you keep an assortment of
spare bulbs in the car.
When traveling abroad, remember that some
countries require spare bulbs as part of the
safety equipment.
1. Turn the ignition on.
2. Turn light switch to position 2 to raise the
headlights.
3. Turn the ignition off.
4. Unscrew the 3 Phillips screws (arrows) and
remove headlight cover.
5. Turn holder of defective bulb antic-
lockwise to limit stop and remove.
6. Unplug wires, replace bulb and recon-
nect the wires.
7. Reinstall bulbholder. Be sure that guide
pins on bulb base fit into socket of reflec-
tor. Turn bulbholder clockwise to limit
stop.
8. Check functioning of bulb and adjust
headlights.
9. Reinstall headlight cover.
99