Porsche 911 GT3R 2010, Technical Manual

Page: 20 / 144

17
Filling the system should be carried out as follows:

Disconnect the quick release fittings in the engine bay and
connect the corresponding fittings with those of the filling
system.
Pressure Scavenge
 Switch on the pump. The system will be filled.
 The device must run for ten minutes to guarantee that the system
is correctly filled and bled
 Warm-up the engine (80°C) and, if required, fill the reservoir to
the maximum level with the filling device attached
 The expansion tank cap must be closed throughout the
entire procedure